ARC Racing 6695 Predator 212 Speedway Billet Flywheel, Non Hemi

The new 6695 billet flywheel for the Non Hemi Predator from ARC Racing has an ultra low drag fin design that will greatly reduce air drag on your racing engine, while still moving enough air for cooling. Less air drag on the flywheel means more power freed up throughout the power curve, especially on the top end. This flywheel is designed for oval track or drag racing. Will work with stock pull rope and OEM coil. The 6695 will fit generations 1 & 3 predator engines. It will not fit the hemi predator engine (generation 2). This flywheel will have the same basic set up as the 6625. This flywheel also has a minimum coil gap of .030 as all our other flywheels do, meaning DO NOT set the gap closer than .030. However you can use .050 to .075 in most cases. The magnets in our flywheels are very strong and opening up the coil gap will help reduce magnet drag as the magnet moves underneath the coil. This is yet another advantage to our flywheels that will help free up more power in these engines. This new 6695 flywheel has more power making potential than any other approved flywheel on the market. Our test as well as testing from other reputable companies shows it will make around the same power with zero tape on the blower housing as the 6625 does with the blower housing fully taped up. Timing is 32 degrees BTDC with stock key. Flywheel weight 3.4lbs. Minimum coil gap .030. Will not work with charging stator